Відео

If U don't know how a Safety Vest would make you safer from traffic on a busy road, there is no way I could explain it to you.

Depends on what are doing with the shackle with that situation of that

But Casey, if it went perfectly, it wouldn't make interesting content.

The Cherokee is on time-out, I'm not sure that works on cars.....

Ron Pratt?? Pepe's towing is way better and ive never seen zip ties being used.....ever!

Yeah mate, thats good for another 50,000 😂

Sir, thats not an escavator

The Milwaukee gun on the wrong setting that’s why it goes slow when you don’t have any resistance on it change the setting to 3 and it will go faster

When the dealer make sure you buy after one test drive 😂😂😂

At 11.50 when you moved your shackle higher I`m afraid you,re not pulling your truck into the ground more but lifting it higher. If you imagine your snatch block as an arrow, that is direction of the resultant force on your two lines. ie bisecting the angle of the 2 lines leaving the snatch block. Good video anyway.

Thanks Casey. The cable tie tip is a good one for me and my fat fingers. Not needed in your case - lucky you 🙂

You and Eric @IDoCars both have your own versions of “Blue.”

Just thought... Could you rig this up? This might only work if the under-reach and the boom do not clash with each other... Extend the under-reach all the way up in the upright position. Put a snatch block on it. Run the winch line through the snatch block over the top of your truck and cab. You then have a winch to pull from the front of the truck.

Interesting video. Honest language reactions. Amazing people take helpful information from a Creator and expect others to do it that way, like it is written in stone. I find it entertaining when Casey talks about comments telling you how to do your job. Ron Pratt taught me about redirecting and putting a hook on properly. These things have been very useful for me. But honestly Casey, Rory, Matt and Peppies Towing have helped me concur more situations then Ron Pratt. I watch them all, to learn ways to make tasks on my property easier.

😊😊😊 just put a little bubble gum on it

audience engagement comment thumbs up on damage report.

10k miles and that much brake dust… that thing had a hard life! Also, did you and Ethan go separate ways?

18:13 casey take your impact gun out of mode 4 and put it in mode 3 then you will get all the ugga duggas in and out, Mode 4 is the controll modes As you say it slows down once it realises the bolt is undone to prevent it flying off

Casey it could be a mechanic changing jobs . And of his harbor freight tools are strapped to the right wall ?😊

easy fix once the window has been replaced is have a 3 inch long Nylon bush made up and fit it to the RAM so that the ram has a soft stop before the actual stop

Casey there should be a setting on that impact gun, I could be wrong but I’ve never seen a Milwaukee that didn’t have a button on the base to change between 3 or 4 settings

I know I’m late but what happened to Ethan

I was gonna ask if you’ve ever done a Tripple. There’s my answer

Another informative video

Forgot to hit record? Well, he never said he was good at this.

IF 🤣🤣🤣

Hey Casey, do not put a zip tie on the rim sling!!!!

At least they wrecked in a spot with a wide berm to keep you farther away from traffic. The driver had to drive a long way off the road to find something to hit. He must be moving equipment from a shop or something because I don't think anybody's household stuff could weigh as much as that truck is hauling. Or maybe it's loaded with illegals! In one of your videos you said you always looked at the load to make sure that you weren't transporting something that was illegal....... Whatever the load it has definitely shifted. I am surprised the side of the box isn't bulged out.

Amateur 😂

Your thumbnail is screaming 'I'm going to talk about chemtrails'.

You guys need a Johnson caterpillar or bobcat

As an operator..... That shit should be impossible

I would have told them you need to see and confirm the contents of the vehicle to ensure there is nothing illegal for you to move. Also to ensure that all damage is documented.

Ron Pratt really reminds me of the kid in class that always did the right thing to check a box and look down his nose at other people. I’m not saying he is that way, that’s just the kind of person he reminds me of.

Bummer about the missing footage, but to your credit, you've never said you were any good at this. Also, I've never towed anything in my life, but I saw a UA-cam video from some guy, so now I"m pretty much an expert and I just came here to tell you you're doing it wrong. #feedthealgorithm

imagine the stuff in the back....I'm guessing total carnage

You switch between settings if that is a newer milwaukee impact @caseyladelle

Just one of those days, I guess. But seriously, Casey, ya gotta stop talking to yourself, people are gonna notice. 😁❤

At 30:25 we found the reason for the Please tell me I was recording that "Son of a bitch" at 13:38... No mention of ripping the wheel off then, even though it was missing after dragging the frontend uphill!

Don’t you just hate when you forget to hit record lol I’ve don’t that a time or two lol

I thought it was interesting that Casey didn’t laugh after saying “smoked that pole”. 😬 also notice that 50% of the people that don’t move over when you’re in the side of the road drive Teslas….

I don't know why you make things so complicated. Once the front is off the pole hook onto the front and pulling up onto flat ground.you are trying to move the heaviest part sideways, dumb and I'm not even in the business. Common sense rules supreme.

Rolling it over ain’t the issue. Doing it smoothly is. If it comes down hard you’ll likely twist the frame or do damage beyond what has been done and may yet be repaired.

Do you worry about unknown contents sitting in your yard? Just wondering, if, in some cases, you need to see what's inside?

Casey, if you didn’t already know, you can adjust the power level on the impact. The setting it’s on only gives you all the beans when it senses tension. There’s a button to adjust it to a higher power level for all the beans all the time.

OMG YOIR DOING OT WRONG. you're supposed to back the shackle pin backn1 turn with a zip tie !!🤣🤣

Its over loaded.....😮😮😮

19:54 LaDelle Body Shop now open for business!